0755-26552352
webmaster@huntsort.com
QQ咨询

TI-25S 超声波测厚仪


The Check-Line TI-25S is ideal for the person that tests a few different materials regularly. The TI-25S contains 8 velocities of the most common materials (refer to complete list of Materials below) and two velocities that the user can set using a simple software program.

The tool's backlit display is easy to read, even in dim light, and the unit operates for up to 200 hours on a single set of batteries.

 

The Checkline TI-25S comes complete, ready to use, and is protected by our 5 year limited warranty.


  • Multi-function 4.5 digit liquid crystal display with 0.500 inch numerals, backlit for use in poor light conditions.

  • Measurements displayed in inches, inches/microsecond, millimeters, and meters/second.

  • Measures from 0.025 to 6.000 inches (0.60 to 150.0 millimeters) switch to select English or metric units.

  • Four readings per second for single point measurements.

  • 8 pre-set velocities and 2 custom velocities

  • Ability to change between velocities without the use of computer software

  • IP 65 Rated


Range in Steel

0.025-6.00" (0.60-150.0 mm) Will   vary in other materials

Resolution

.001" (0.01 mm)

Velocity Range

0.0492 to .3937 in/μs. 1250 to 10,000   meters/sec

Dimensions

2.5 W x 4.75 H x 1.25 D inches

Display

4½ - Digit, 0.5" Backlit LCD

Probe

1/4", 7.5 MHz, actual wearface is   3/8" (10 mm)
  Probe P/N: T-102-3300

Cable

4 ft. (1.2 m) waterproof cable with   non-polarized, quick-disconnect connectors. Optional lengths up to 50 ft. (15   m).

Temp. Limits

Ambient: -20 to 120° F (-30 to 50° C)
  Material: -0 to 200° F (-20 to 100° C
  Special high temperature probes are optionally available.

Battery Type

Two 1.5V alkaline or 1.2V NiCad AA cells.

Battery Life

Typically operates for 200 hours on   alkaline and 130 hours on NiCad.

Weight

10 ounces (283 g)

Accessories   Included

Probe/cable assembly. 4 oz. bottle of   coupling fluid, NIST Calibration Certificate, 2 AA batteries, operating   instructions, hard-plastic carrying case.

Warranty

Gauge:   5 Years
Probes:  90 Days


订货清单

The TI-25S is supplied as a complete kit with the gauge, probe, 4 oz. bottle of coupling fluid, 2 AA batteries, PC-based Software, NIST-Traceable Calibration Certificate, and Operating Instruction Manual - all in a foam-fitted carrying case.

 

配件

TICC-M  Protective Holder for Most TI Series Gauges

CF12    Coupling Fluid - 12oz 

V-Block V-Block Transducer Holder (For 3/16" & 1/4" Transducers only)  

T-102-3300  1/4" diameter, 7.5 MHz, dual element transducer (Standard Probe for TI-25S)

DATACOMM    PC Program to download Custom #1 & Custom #2 calibrations to TI-25S (N-306-0010 cable must be ordered)    

N-306-0010  6 foot RS232 Cable (DB-9 to Lemo 2 pin) 

BATT-RC4AA-WC   4-pack 2300mAh AA Ni-MH Rechargeable Batteries & Charger Kit

 

订货型号

TI-25S Ultrasonic Thickness Gauge Kit with T-102-3300 Probe