0755-26552352
webmaster@huntsort.com
QQ咨询

3000PRO 涂层测厚仪


The new Check-Line 3000PRO Series coating thickness gauge is a multifunctional fully menu driven gauge for fast, professional and precise coating thickness measurement for:

1.   paint and electroplated coatings on iron and steel

2.   paint and anodizing coatings on non-ferrous metals and on austenitic stainless steels

The user will select one or more probes best suited for their application to connect to the Checkline 3000PRO gauge as all the probes are interchangeable and their internal calibration is stored within a small microchip inside the probe connector housing. This provides for quick and easy hot-swapping from one probe to any other in seconds.

Eight (6) separate probes are offered for a wide variety of applications.


  • Automatic identification of the substrate

  • Highly wear-resistant measuring poles made of carbide metal

  • Special probes for unusual measurement tasks

  • Safe use even for special applications such as sand-blasted surfaces, small parts and curved surfaces

  • Scan mode for the quick recognition of coating thickness variations on large surfaces, including display of minimum and maximum readings

  • Display backlight for poor ambient lighting conditions

  • Online statistics with all statistical parameters

  • Extensive memory storage for recording of up to 10,000 data pints in up to 500 separate files "batches"

  • Alphanumerical file names can be used to identify each of the separate files "batches"

  • Infrared interface for wireless data transfer to printer and PC or via built-in RS-232

  • Includes FREE software for transferring data to a PC including histogram function

  • Optional high temperature footer for measuring on surfaces up to 150 °C/302 °F

  • Includes Traceable Calibration Certificate

  • 1 Year Warranty


Measuring   principle:

Magnetic induction method (F-version);   Eddy current method (N-version)

Measuring   range:

3000PRO:
  0 - 60.00 mils / 0 - 1500 µm

Tolerance:

± (0.7 µm/0.04 mils + 1% of reading)

Resolution:

Refer to RESOLUTION TABLE, above

Display:

4-digit display (digit height 10   mm/0.4") and 32 alphanumerical characters; switchable backlight

Minimum   measurement area:

5 mm x 5mm/0.2" x 0.2"

Minimum   curvature radius:

convex 2mm/0.08"; concave   5mm/0.2"

Minimum substrate   thickness:

0.2mm/8 mils (for F-versions); 50 µm/2   mils (for N-versions)

Calibration   methods:

- Factory calibration: no calibration   required for standard applications
  - Zeroing (1-point calibration): measurements on small geometries
  - Zeroing and foil calibration (2-point calibration): increased measuring   accuracy
  - Two-foil calibrat

Limit values:

Selectable; optical and acoustic signal   if limit value is exceeded

Scan mode:

For continuous measurements; for the   quick recognition of coating thickness variations;
  with permanent display of minimum and maximum reading

Statistics:

Single-value statistics: n, avarage x, s,   kvar, min, max, cp, cpk from max. 10,000 readings
  Block-value statistics: n, avarage x , avarage s, avarage kvar , min, max,   cp, cpk; block size 3 to 100 readings

Data memory:

10,000 readings in max. 500 selectable   files; alphanumerical file names; stored readings and statistical values   individually recallable

Interfaces:

Infrared and serial RS232 interface

Language:

Operator prompting and documentation in   German, English, French (optional other languages)

Operating   temperature:

0 °C to 50 °C/32 °F to 122 °F (storage   temperature - 20 °C to +60 °C/-4 °F to 140 °F)

Surface   temperature:

5° F - 140° F / -15° C - 60° C (standard)
  5° - 302° F / 15° - 150° C (w/3000-HTF)
  5° - 572° F / 15° - 300° C (w/3000-HTF-300C)

Power supply:

2 x round cell (AA) 1.5 V up to 60 hours   of operating time

Housing/keypad:

Protection class IP52 (protection against   dust and dripping water)

Dimensions:

Gauge: 140 mm x 62 mm x 30mm/5.6" x   2.5" x 1.2" (HxWxD)
  Probe: dia. 14 mm x 83mm/dia. 0.56" x 3.3"

Weight:

approx. 200 g/7 oz (gauge including   batteries and probe)

Standards:

DIN EN ISO, ASTM, BS

Warranty

1 Year

Calibration Certificate

Included


订货清单

The Checkline 3000PRO is supplied as a complete that includes the gauge, probe, manufacturers calibration certificate, a ferrous and or non-errous zero plate(model dependant), 2 calibration foils, 2 AA batteries, soft pouch, instruction manual all in a rugged plastic carrying case.

 

配件

PROBE-F Ferrous Only Probe (60 mils/1500 microns)       

PROBE-N Non-Ferrous Only Probe (60 mils/1500 microns)   

PROBE-FN   Ferrous & Non-Ferrous Only Probe (60 mils/1500 microns)

PROBE-FN02 Ferrous & Non-Ferrous Probe (8 mils/200 microns) 

PROBE-F35  Ferrous Only Probe (140 mils/3500 microns)    

PROBE-FN35 Ferrous & Non-Ferrous Probe (140 mils/3500 microns)    

3000-RS232 3000-RS232 DB9 Serial Cable to connect 3000PRO to PC 

3000-HTF   High Temp Footer  

3000-HTF-300C  Extra Hi-Temp Footer (572°F/300°C) $399.00

3000-PTS   Coating Thickness Gauge Stand    

3000-IR-USB    3000-IR-USB Infrared Adapter for Data Transfer to PC via USB   

3000-IRP   3000-IRP Infra-Red Printer

USB-RS232-ADAP RS232 to USB Adapter

 

订货型号

3000PRO Gauge WITHOUT PROBE


相关型号

3000-PTS

3000-IRP