|
联系方式 ： 13352927502
转速计，又名转速表、转速仪，是机械行业必备的仪器之一，用来测定电机的转速、线速度或频率。常用于电机、电扇、造纸、塑料、化纤、纺织、汽车、飞机、轮船等制造业。 大多常用的为手持离心式转速计。
转速计，又名转速表、转速仪，是机械行业必备的仪器之一，用来测定电机的转速、线速度或频率。常用于电机、电扇、造纸、塑料、化纤、纺织、汽车、飞机、轮船等制造业。 大多常用的为手持离心式转速计。美国Checkline旗下的转速计一般为数字式，有接触式和非接触式两种测量。非接触式采用光电器件测量，无连接轴，对被测件无任何影响，提高测量精度。
例如Checkline CDT-2000HD型转速计，兼有接触式与非接触式两种测量方式，精准测量转速，表速和长度。可选用Checkline CDT-1000HD型。
CDT-2000HD运用：
The CHECK•LINE® CDT-2000HD Combination Hand-Held Digital Tachometer combines the best features of both contact and noncontact models to accurately measure RPM, surface speed and length. When using the non-contact mode, rotational speed (RPM) is measured using a visible beam of light. The CDT-2000HD can be up to 24 inches away from the small piece of reflective tape that is affixed to the rotating element. In the contact operating mode, the speed is sensed by directly contacting the rotating device using the cone tip or surface speed wheel supplied with the instrument. The CDT-2000HD's rugged construction, portability and outstanding features make it an ideal choice for maintenance personnel, machine operators or others in a wide variety of machinery and material handling applications.
CHECK-LINE便携式手持数字转速表CDT-2000HD，广泛运用于不同机械和材料处理应用程序。集成接触式和非接触式两种模式，测量更加精准，可测转速，线速度和长度。在非接触模式下，通过可见光束测转速。最大可以在距离测量件小片放光带24英寸的情况下测量。在接触式模式下，运用自带配件锥头和表速轮接触旋转装置来感应速度。CDT-2000HD机身结实、使用便携和性能卓越，是维修人员，机械操作员和用户的理想之选。
测速范围1-99999 RPM 转数/分
精度为0.02%，分辨率达0.01 rpm
存储卡，可存储最大，最小，平均和最新值
可在离被测件最大距离为24英寸的情况下测量
塑橡胶壳机身，免受恶劣自然环境影响
标配周长为6英寸的表速轮，还可以选配周长12英寸或者10厘米的
如果只需要非接触式转速计，可选CDT-1000HD
量程
接触式：1.00 - 19,999 rpm
非接触式：1.00 - 99,999 rpm
分辨率 | 0.01 from 0 –100 |
0.1 from 100 – 1,000 | |
1 from 1000 – 99,999 | |
精度 | ± 0.02% of reading or ±1 digit |
显示 | 5-Digit LCD, 10mm high |
小数点 | Automatic |
内存 | Maximum, minimum, average and last reading (retained in memory for the life of batteries) |
测量系统 | |
非接触式 | Visible LED light beam |
接触式 | Contact adapter |
应用单位 | |
转速 | RPM |
表速 | Feet/min, inches/min and meters/min |
长度 | Feet, inches, meters |
感应距离 | Up to 24 inches (60 cm) |
显示更新率 | 0.5 seconds or one measuring period |
自动关机功能 | After 30 seconds of non-use (minimum, maximum average, and last reading retained in memory) |
电池续航 | 40 hours continuous use (approx.) with alkaline batteries |
电池类型 | 2 AA (1.5 V) or rechargeable |
重量 | 6 ounces (170 grams) |
外壳材质 | ABS Plastic |
运行温度 | 32 to 122° F (0 to 50° C) |
存储温度 | – 4 to 158° F (–20 to 70° C) |
1. Units of Measure Indicators show the user-selected units of measure.
2. Contact Indicator shows if contact or non-contact operation is selected.
3. Low Battery Indicator alerts the operator if the batteries are low.
4. On-Target Indicator confirms that the measurements are reliable.
5. Memory Indicators are illuminated when the maximum, minimum, average and last readings are recalled to the display for viewing.
订货清单
Gauge, contact adapter, cone tip adapter, 6" circumference universal surface speed wheel, reflective tape, NIST-traceable calibration certificate, operating instructions and foam-fitted, hardplastic carrying case.
转速计，接触式适配器，锥头适配器，表速轮，反光带，校准证书，操作说明书，泡沫垫，硬塑料仪表箱。
配件
DTCA Tachometer Cone Tip for CDT-200HD
CDT-TAPE 10 Strips of 1/2 x 4 inch reflective tape
CDT-WHEEL 0.1 m Circumference wheel for CDT-2000HD
DT6 6 Inch Circumference Tachometer wheel, 7mm shaft
DT12 12 Inch Circumference Tachometer wheel, 7mm shaft
DTSX Shaft Extension for Tachometers, 3 inch
DTFA Funnel Tip for Hand-held tachometers
LMA-3 12" Knurled Aluminum Measuring Wheel
205TS-4 Qty 4 Reflective Tab Sheet, 35 1/2" x 1/2" Squares
BATT-RC4AA-WC 4-pack 2300mAh AA Ni-MH Rechargeable Batteries & Charger Kit
CDT-ADAP Contact Apdapter for CDT-2000 and CDT-2000HD
订货型号
CDT-2000HD 接触式&非接触式
相关型号
如只需要接触式测量，可选用Checkline CDT-1000HD型
