|
联系方式 ： 13352927502
Measuring Range
0.040 - 6.00 inches
1.00 - 150.0 mm
The Check-Line TI-25LT Ultrasonic Steel Thickness Gauge accurately measures steel thickness and the extent of corrosion - from only one side!
Standard configuration: In its standard configuration, the Check-Line TI-25LT is factory set to MEASURE STEEL ONLY
Optional configuration: As a “no cost” option, the TI-25LT can be factory set to measure on stainless steel.
Includes NIST-Traceable Calibration Certificate
Resolution of 0.004 inch (0.01 mm)
Large, backlit LCD display retains last reading
Simple operator controls virtually eliminate training
Special-purpose probes are offered for a variety of applications
The gauge is impact-resistant and environmentally sealed to provide trouble-free operation under the toughest field conditions
Switch-selected units for inches or mm
For underwater surveying, probe cable lengths up to 50 feet are optionally
The TI-25LT probe is waterproof and can be submerged in water
CE Certified
Made in the USA with 5-Year Warranty
IP 65 Rated
Range in Steel | 0.040-6.00" (1.00-150.0 mm) |
Resolution | .004" (0.01mm) |
Display | 4½ - Digit, 0.5" Backlit LCD |
Velocity Range | .0787-.3937 in/µs |
Probe | 1/4", 5 MHz, actual wearface is 5/8" (17mm) |
Probe Wearface | PEEK (Polyethylethylkytone) |
Cable | 4ft. (1.2m) waterproof cable with non-polarized, quick-disconnect connectors. Op |
Temp. Limits | Ambient: -20 to 120° F (-30 to 50° C) |
Battery Type | Two AA batteries |
Battery Life | 200 hours |
Weight | 710 ounces (280g) |
Dimensions | 2.5 x 4..5 x 1.25" |
Accessories | Probe/cable assembly, 4 oz. bottle of coupling fluid, NIST Calibration Certificate, 2 AA batteries, operating instructions, hard-plastic carrying case. |
Warranty | Gauge: 5 Years |
订货清单
Complete Kit includes: Gauge, probe, 4 oz. bottle of coupling fluid, 2 AA batteries, NIST-Traceable Calibration Certificate and Operating Instruction Manual - all in a foam-fitted carrying case.
配件
TICC-M Protective Holder for Most TI Series Gauges
CF12 Coupling Fluid - 12oz
V-Block V-Block Transducer Holder (For 3/16" & 1/4" Transducers only)
SB4 4 Step Steel Test Block, 0.1 / 0.2 / 0.4 / 0.6 inch - Uncertified
T-102-2000 1/4" diameter, 5.00 MHz, dual element transducer (Standard Probe for TI-25LT)
订货型号
TI-25LT Steel Only Ultrasonic Thickness Gauge Kit with T-102-2000 Probe
TI-25LT-SS Stainless-Steel Only Ultrasonic Thickness Gauge Kit with T-102-2000 Probe
