|
联系方式 ： 13352927502
TI-CMXDLP - Black & white model
TI-CMXDLP-C - Color model
The new CHECKLINE® TI-CMXDLP is the top-of-the-line model in the CMX Series of Gauges that measures both coating and wall thickness quickly and accurately—from only one side. In addition, when switched to Pulse-Echo mode, the Check-Line TI-CMXDLP automatically measures and eliminates the coating from the wall thickness measurement, enabling the user to locate the finest corrosion and pitting—without removing the coating.
It features an A-Scan Display Mode allowing the user to see the actual wave form echoes, graphically, providing the insight necessary to tune the settings on the gauge for optimal performance. This is especially important on challenging measurement tasks. The TI-CMXDLP also features a new E-EV Operating Mode ("Echo-Echo-Verify"), also known as Triple-Echo Mode, which provides addition assurance that the displayed measurement is accurate and fully verified by subsequent echoes.
Oversized graphic LCD is backlit and features easy to read fonts, graphics and display codes showing all critical settings including Velocity, Operating Mode, Alarms, Scan Mode and more. The backlight can be set to ON (always-on), OFF (always-off) or AUTO (automatically-on when measuring).
Wide variety of Probes, both DUAL-ELEMENT and SINGLE-ELEMENT can be used for nearly any application.
Auto probe recognition with Auto Zero or Manual Zero.
Bar graph with user-set start end values providing highest resolution around the target thickness value.
Differential Mode allows user to set a "target thickness value" and display will show the DIFFERENCE between actual and target thickness as a plus or minus value.
64 custom setups can be stored and retrieved for convenient use and labeled for easy identification
Display Hi/Lo Alarm Limits with audible and visual indicators.
Adjustable Gain in 5 steps (VLow, Low, Med, Hi & VHi) in 2db increments providing a 8 db gain adjust range (42–50 db).
Measures Coatings up to 0.100"
Metal housing provides strong protection against harsh environments.
T-8071-0868 Probe to 1"-1MHz Single-Element Membrane Probe to measure Blow Holes in Thick PE Pipes and Fittings
2 Year Warranty, CE-Certified and includes NIST-Traceable Calibration Certificate.
IP 65 Rated
Range in Steel: | Pulse-Echo Mode: Pit and Flaw detection measures from 0.025 - 9.999inches (0.63 to 254 millimeters) |
Range in Coating Only Mode | 0.0005" - 0.1000" / Resolution: 0.0001" |
Max Coating | 0.100" |
Resolution: | .001 inches (0.01mm) |
Velocity Range: | .0492 to .3936 in./ms |
Units: | Inch or mm |
Measurement Modes: | - Pulse-Echo (corrosion mode) |
Transducer Types: | Dual Element (1 to 10 MHz). |
Output | RS-232 for upload/download of setups |
Memory capacity: | TI-CMXDLP: over 200,000 measurements |
Power Source: | Three 1.5V alkaline or 1.2V NiCad AA cells |
Battery Life: | Typically operates for 150 hours on alkaline and 100 hours on NiCad |
Auto Power off: | After 5 minutes of non-use |
Display: | 1/8 in. VGA grayscale display 62 x 45.7mm |
Keyboard: | Membrane switch with twelve tactile keys |
Case: | Extruded aluminum body with nickel-plated aluminum end caps (gasket sealed). |
Temp. Limits | Ambient: -20 to 120° F (-30 to 50° C) |
Weight, net: | 383 grams |
Dimensions: | 63.5 W x 165 H x 31.5 D mm |
Warranty: | 2 year limited |
Certification: | CE Approved, Factory calibration traceable to national standards |
订货清单
The TI-CMXDLP is supplied as a complete kit with the gauge, probe, 4 oz. bottle of coupling fluid, 2 AA batteries, NIST-Traceable Calibration Certificate, operating manual, Software, RS-232 output cable, RS-232 to USB adapter, software all in a foam-fitted carrying case.
配件
T-102-2900 1/4" diameter, 5.00 MHz, dual element, through-coating transducer
T-104-2900 1/2" diameter, 5.00 MHz Coating Transducer
T-104-9900 1/2" diameter, 3.5 MHz Coating Transducer
T-102-2900-H 1/4" 5Mhz Coating Transducer for Material Temp up to 300 °F (150 °C)
T-212-2001 1/4", 5 MHz Hi-Temp (900 F / 500 C) Transducer
TI-CMX-UW-50 1/2" 5 Mhz Hi Damp Coating Probe with 50 ft. underwater cable
TICC-MVX Protective Holder for TI-MVX, TI-PVX and TI-MMX-SDL
CF12 Coupling Fluid - 12oz
CF-4H High Temp Coupling Fluid 4oz (0 - 600 F / -18 to 316 C)
CF-4H-950F High Temp Coupling Fluid 4oz (600 - 950 F / 316 - 510 C)
V-Block V-Block Transducer Holder (For 3/16" & 1/4" Transducers only)
QC2525 Shear Wave Transducer 2.25 Mhz .250" Dia
QC3725 Shear Wave Transducer 2.25 Mhz .375" Dia
QC5025 Shear Wave Transducer 2.25 Mhz .500" Dia
PQC5035 Shear Wave Transducer 3.5 Mhz .500" Dia
QC2550 Shear Wave Transducer 5.0 Mhz .250" Dia
QC3750 Shear Wave Transducer 5.0 Mhz .375" Dia
QC5050 Shear Wave Transducer 5.0 Mhz .500" Dia
QC2510 Shear Wave Transducer 10.0 Mhz .250" Dia
QC3710 Shear Wave Transducer 10.0 Mhz .375" Dia
QC5010 Shear Wave Transducer 10.0 Mhz .500" Dia
N-104-0020 LEMO 00 - Microdot Single Probe Transducer Cable, 4 foot length
QW2545 Quick Change Wedges 45° .250" Dia
QW2560 Quick Change Wedges 60° .250" Dia
QW2570 Quick Change Wedges 70° .250" Dia
QW3745 Quick Change Wedges 45° .375" Dia
QW3760 Quick Change Wedges 60° .375" Dia
QW3770 Quick Change Wedges 70° .375" Dia
QW5045 1/2"-45 Deg Angle Acrylic Wedge
QW5060 1/2"-60 Deg Angle Acrylic Wedge
QW5070 Quick Change Wedges 70° .500" Dia
T-8071-0868 1.00", 1.00 Mhz, Side, BNC, Comp
N-106-0100 BNC - LEMO 00 Single Probe Transducer Cable, 6 foot length
BATT-RC4AA-WC 4-pack 2300mAh AA Ni-MH Rechargeable Batteries & Charger Kit
订货型号
TI-CMXDLP Combination Coating & Wall Thickness Gauge kit with T-102-2900 probe
TI-CMXDLP-H Combination Coating & Wall Thickness Gauge with T-102-2900-H High Temp Probe, up to 300 F (150 °C)
TI-CMXDLP-C Combination Coating & Wall Thickness Gauge kit with Color LCD and T-102-2900 probe
