|
联系方式 ： 13352927502
2 Versions:
CMXDL+ - 黑白屏幕
CMXDLP-C - 彩色屏幕
The new Dakota CMXDL+ is the top-of-the-line model in the CMX Series of Gauges that measures both coating and wall thickness quickly and accurately—from only one side. In addition, when switched to Pulse-Echo mode, the CMXDL+ automatically measures and eliminates the coating from the wall thickness measurement, enabling the user to locate the finest corrosion and pitting—without removing the coating.
美国Dakota CMXDL+超声波测厚仪可以同时快速精准测量材料的涂层和壁厚。当测厚仪切换到脉冲-回波模式是，CMXDL+可自动穿透涂层，测量材料净壁厚，这样使用者无需清除涂层而精准探测到被测材料上的腐蚀和凹陷。
It features an A-Scan Display Mode allowing the user to see the actual wave form echoes, graphically, providing the insight necessary to tune the settings on the gauge for optimal performance. This is especially important on challenging measurement tasks. The CMXDL+ also features a new E-EV Operating Mode ("Echo-Echo-Verify"), also known as Triple-Echo Mode, which provides addition assurance that the displayed measurement is accurate and fully verified by subsequent echoes.
CMXDL+在CMXDL上增加了A扫描模式，使得用户捡到图片的形式的，真实的波形回声，这样用户可在必要的时候调成设置，保证最佳测量状态。CMXDL+新增了E-EV操作模式， 也就是熟知的三重回波模式，提供多重保障，通过并发的回波来保证测量的精准全面。
Oversized graphic LCD is backlit and features easy to read fonts, graphics and display codes showing all critical settings including Velocity, Operating Mode, Alarms, Scan Mode and more. The backlight can be set to ON (always-on), OFF (always-off) or AUTO (automatically-on when measuring).
自带的大尺寸LCD屏幕使得用户可以清晰阅读字体，图形和显示代码。所有的关键设置信息尽收眼底，包括速度、操作模式，报警和扫描模式等信息。CMXDL屏幕背光可设置为一直开启、一直关闭或者自动（测量时开启）。RS-232输出，将数据传输给打印机和电脑，标配数据采集和分析软件。
Five user-selected operating modes are included:
Coating On: Measures wall thickness using Pulse-Echo. It separately displays wall & coating thickness.
Coating Off: Measures wall thickness using Pulse-Echo. It displays wall thickness only.
Temperature Compensated: Measures wall thickness using Pulse-Echo and automatically adjusts calibration to compensate for changes in material temperature.
Thru-Coat: Measures wall thickness only using Echo-Echo. (coating is NOT included)
Coating Only Mode (CT): (Coating Thickness) Measures from 0.0005 to 0.100 inches (0.013 to 2.540 mm). Range will vary slightly depending on the coating.
5个可选的操作模式
涂层开启测量模式：通过脉冲-回波模式测壁厚，屏幕会分别显示壁厚和涂层值
涂层关闭测量模式：通过脉冲-回波模式测壁厚，屏幕只会显示壁厚值
温度补偿测量模式：通过脉冲-回波模式测壁厚时，会随着材料的温度变化而自动标定，相应的进行温度补偿
透过涂层测量模式：只要通过回波-回波模式才可测净壁厚
涂层测量模式：仅仅测量涂层，测量范围：0.013-2.540mm
在CMXDL超声波测厚仪的基础上，增加了A扫描功能，3个独立闸门，另有彩色屏幕主机可选
Built-in memory with RS-232 output for transferring data to a Printer or PC
Includes Datacomm Data Transfer & Analysis Software and RS-232 Cable, FREE
Data Files can be user-set for a "grid type" structure where data is formatted in Rows & Columns or a "sequential" file where all data appears in a single column
Each "grid type" File can be set for up to 999 rows by 52 columns
Each "sequential" File can be set for up to 512 rows by 1 column
Each File can be set for "data only" or as "data plus B-scan Graphic". Memory Capacity is over 225,000 data values or over 16,000 data values with B-scan
测量 | |
P-E(脉冲-回波)模式 | 0.6~508mm |
PECT(脉冲-回波涂层)模式 | 0.6~508mm，涂层0.0127~2.54mm |
PETP(脉冲-回波温度补偿)模式 | 0.6~508mm |
E-E(回波-回波)模式 | 2.54~102mm |
E-EV(回波-回波验证)模式 | 2.54~102mm |
CT(测量涂层)模式 | 0.0127~2.54mm |
分辨率 | 0.01mm |
声速范围 | 1250~13995m/s |
单位 | 公制或英制 |
显示 | |
显示屏 | VGA灰色显示，240x160象素。可视区62x45.7mm，EL背光 |
显示屏(彩色) | 可选彩色版本主机 |
A-扫描 | 检波+/-(缺陷视场)，RF(全波视场)，三个独立闸门 |
B-扫描 | 穿过断面视场，显示速度为每一屏15秒 |
大数字显示 | 标准厚度显示，17.78mm高 |
厚度条形扫描 | 每秒6个读数，在B-扫描和大数字显示中可见 |
超声波参数 | |
测量模式 | P-E/PECT/PETP/E-E/E-EV/CT |
脉冲 | 双通道方波脉冲 |
接收 | 110dB(极限)范围内采用手动或AGC增益控制，双通道接收 |
数据处理 | |
内置存储器 | 开启图形时，可存储16000个读数(每个读数包括B扫描波形和仪器设置) 关闭图形时，可存储21000个读) |
其他 | |
电源 | 3节5号电池，可用150小时，电池电量显示，无操作5分钟后自动自动关机 |
键盘 | 12个触摸键 |
外壳 | 挤压铝机壳，底盖用镀镍铝板加密封垫封装 |
工作温度 | -10～60℃ |
尺寸 | 63.5x165x31.5mm |
重量 | 含电池385g |
质保 | 2年 |
订货型号
CMXDL+ | Dakota CMXDL+ Data-Logging Combination Coating & Wall Thickness Gauge, Z-172-0001 |
TI-CMXDLP-H | Combination Coating & Wall Thickness Gauge with T-102-2900-H High Temp Probe, up to 300 F (150 °C) |
TI-CMXDLP-2225 | CMXDL+ Data-Logging Combination Coating & Wall Thickness Gauge with 1/4" 2.25MHz Transducer for thin plastics |
TI-CMXDLP-C | Combination Coating & Wall Thickness Gauge kit with Color LCD and T-102-2900 probe |
配件
T-102-2900 | 1/4" diameter, 5.00 MHz, dual element, through-coating transducer |
T-104-2900 | 1/2" diameter, 5.00 MHz Coating Transducer |
T-104-9900 | 1/2" diameter, 3.5 MHz Coating Transducer |
T-102-2900-H | 1/4" 5Mhz Coating Transducer for Material Temp up to 300 °F (150 °C) |
T-212-2001 | 1/4", 5 MHz Hi-Temp (900 F / 500 C) Transducer |
TI-CMX-UW-50 | 1/2" 5 Mhz Hi Damp Coating Probe with 50 ft. underwater cable |
TICC-MVX | Protective Holder for Long Body UT Gauges, F-149-0001 |
CF12 | Coupling Fluid - 12oz |
CF-4H-950F | High Temp Coupling Fluid 4oz (600 - 950 F / 316 - 510 C) |
V-Block | V-Block Transducer Holder (For 3/16" & 1/4" Transducers only), F-000-7001 |
QC2525 | Shear Wave Transducer 2.25 Mhz .250" Dia |
QC3725 | Shear Wave Transducer 2.25 Mhz .375" Dia |
QC5025 | Shear Wave Transducer 2.25 Mhz .500" Dia |
PQC5035 | Shear Wave Transducer 3.5 Mhz .500" Dia |
QC2550 | Shear Wave Transducer 5.0 Mhz .250" Dia |
QC3750 | Shear Wave Transducer 5.0 Mhz .375" Dia |
QC5050 | Shear Wave Transducer 5.0 Mhz .500" Dia |
QC2510 | Shear Wave Transducer 10.0 Mhz .250" Dia |
QC3710 | Shear Wave Transducer 10.0 Mhz .375" Dia |
QC5010 | Shear Wave Transducer 10.0 Mhz .500" Dia |
N-104-0020 | LEMO 00 - Microdot Single Probe Transducer Cable, 4 foot length |
QW2545 | Quick Change Wedges 45° .250" Dia |
QW2560 | Quick Change Wedges 60° .250" Dia |
QW2570 | Quick Change Wedges 70° .250" Dia |
QW3745 | Quick Change Wedges 45° .375" Dia |
QW3760 | Quick Change Wedges 60° .375" Dia |
QW3770 | Quick Change Wedges 70° .375" Dia |
QW5045 | 1/2"-45 Deg Angle Acrylic Wedge |
QW5060 | 1/2"-60 Deg Angle Acrylic Wedge |
T-8071-0868 | 1.00", 1.00 Mhz, Side, BNC, Comp |
BATT-RC4AA-WC | 4-pack 2300mAh AA Ni-MH Rechargeable Batteries & Charger Kit |
