深圳市汉斯福特科技有限公司，汉斯福特科技，进口无损检测设备，进口工业仪器仪表

3023A1 三轴加速度传感器

加速度传感器中有一种是三轴加速度传感器，同样的它是基于加速度的基本原理去实现工作的，加速度是个空间矢量，一方面，要准确了解物体的运动状态，必须测得其三个坐标轴上的分量；另一方面，在预先不知道物体运动方向的场合下，只有应用三轴加速度传感器来检测加速度信号。由于三轴加速度传感器也是基于重力原理的，因此用三轴加速度传感器可以实现双轴正负90度或双轴0-360度的倾角，通过校正后期精度要高于双轴加速度传感器大于测量角度为60度的情况。三轴加速度传感器的好处就是在预先不知道物体运动方向的场合下，只有应用三维加速度传感器来检测加速度信号。三维加速度传感器具有体积小和重量轻特点，可以测量空间加速度，能够全面准确反映物体的运动性质。

美国Dytran的3023A1是一款微型三轴加速度传感器/振动传感器，压电式工作原理，重量4g，自带4针径向连接器和5-40铰轴安装设计，同时集成3个石英剪切感应元件，再配备钛合金外壳，应对超高湿度和多尘工作环境。

The Dytran 3023A1 is a miniature triaxial IEPE accelerometer weighing just 4 grams.

Available with a 10 mV/g sensitivity, model 3023A1 features an industry standard 4-pin radial connector and 5-40 stud mount. Design of the Dytran model 3023A1 incorporates three quartz shear sensing elements, packaged in a laser welded titanium housing. Units are hermetically sealed for reliable operation in high humidity and dirty environments.

特性

1. 10 mV/g sensitivity

2. 500g range

3. Axis 1 & 2: 1.5 to 5,000 Hz frequency range (+15/-5%)

4. Axis 3: 1.5 to 10,000 Hz frequency range (+15/-5%)

5. 4-pin 1/4-28 radial connector

6. 5-40 tapped hole

7. 4 grams

8. Titanium

9. Hermetic

10. Lightweight

11. Triaxial

12. IEPE

应用

1. Environmental Stress Screening (ESS)

环境应力筛选

2. HALT/HASS

高加速寿命测试和应力筛选

3. General purpose triaxial vibration measurements

一般目的三轴振动测量

Weight, Max. 0.14 oz 4.0 grams

Connector 4- PIN 4- PIN

Mounting Provision 5 - 40 Tapped Hole 5 - 40 Tapped Hole

Sensitivity, -10 / +15%

Frequency Response ±5% 1.5 to 4000 Hz 1.5 to 4000 Hz

Resonant Frequency > 40 kHz > 40 kHz

Broad Band Resolution 0.007 Grms 0.069 m/s2 rms

Spectral Noise 1.25Hz 0.003 µGrms/√(Hz) 0.029 µm/s2

Linearity [2] 1 % F.S. 1 % F.S.

Maximum Transverse Sensitivity 5 % 5 %

Strain Sensitivity @ 250µε 0.006 g/με 0.06 m/s2

Maximum Vibration ±600 Gpeak ±5884 m/s2 peak

Maximum Shock 5000 Gpeak 49033 m/s2 peak

Temperature Range -60 to +250 °F -51 to +121 °C

Seal Hermetic Hermetic

Magnetic Sensitivity at 100 Gauss 0.00005 g/Gauss 4.905 m/s2

ELECTRICAL

Supply Current Range [3] 2 to 20 mA 2 to 20 mA

Compliance Voltage Range 18 to 30 Volts 18 to 30 Volts

Output Impedance,Typ 100 Ω 100 Ω

Bias Voltage 7 to 11 VDC 7 to 11 VDC

Discharge Time Constant 0.3 to 1.5 Sec 0.3 to 1.5 Sec

Electrical Isolation Case Grounded GΩ,min Case Grounded GΩ,min

配件

Supplied Accessories: (1) model 6580 mounting stud (5-40 to 5-40)

Recommended Accessories: model 4114B1 current source power unit, model 6222 adhesive mounting base

Compatible Cables: 6811A, 6812A, 6824A, 6828A, 6873A, 6925A, 6933A, 6967A, 6997A

订货型号

Model Sensitivity (mV/g) Frequency Response (Hz) Mounting Operating Temp (°F)

3023A1

3023A2 10 (-10 to +15%) 1.5 to 10000 (-5 to +15%) 10-32 Tapped Hole -60 to +250

3023A3 5 (-10 to +15%) 1.5 to 10000 (-5 to +15%) Adhesive -60 to +250

3023A4 5 (-10 to +15%) 1.5 to 10000 (-5 to +15%) 5-40 Tapped Hole -60 to +250

3023A6 5 (-10 to +15%) 1.5 to 10000 (-5 to +15%) 10-32 Tapped Hole -60 to +250

3023A9 1 (±10%) 1.5 to 10000 (-5 to +15%) 10-32 Tapped Hole -60 to +250

3023AT TEDS

3023A1T TEDS