|
联系方式 ： 13352927502
PR5210已停产，新型号是PR5211，新旧款参数一致，可完全替代
PR5210数字变送器,即把模拟量变换成数字显示,并按一定的比例输出电流信号或电压信号。MP26数字变送器的设计结合了过程容器中可靠称重信息，操作简单，设置方便，可与大部分应变式称重传感器连接使用，输出4-20mA信号。
The PR5210 series of Digital Process Transmitters combine reliable and accurate weight acquisition with extremely easy operation and setup. Available versions:
Users can access directly all configuration and operation levels via the front serial interface. A Windows Engineering Tool allows convenient configuration from a Windows PC or Laptop. All instrument feature a built-in RS422/485 serial interface using the very simple and versatile SMA-Standard protocol.
Profibus-DP, 12 Mbit (PR 5210/00 + /11)
High-speed Profibus-Interface to connect to PLCs and SCADA systems. Provides weight values at maximum accuracy and speed. Smart Calibration Sartorius PR 5210
The easiest and fastest way to a reliable calibration even without weights due to high precision input amplifier and reference circuit.
Input signal filter
Powerful digital low pass filter to suppress unwanted signal variation caused by external disturbances. Variable cut-off frequency and selectable filter style.
Password protection
User definable pass code to prevent unauthorised access to parameters or calibration data.
Full Digital Signal Processing with up to 4.8 Mio Divisions Internal Resolution
全数字信号过程变送器，分辨率4.8 Mio Divisions
High Performance Sense Amplifier Circuit for Maximum Accuracy
高性能感应放大器电路，实现最高精度
SmartCalibration feature for fast calibration even without weights
智能快速校准，不需要砝码
Direct calibration and configuration via Windows-PC
串口连接Windows-PC，直接校正和配置
W&M approval for 6000e, class III (EN 45501/OIML R76)
W&M认证6,000 e，精度等级Class III
Supply voltage 24 VDC
供电电压：24VDC
Protection class IP 20, DIN-Rail mounting
防护等级IP20，导轨式安装
Sensor input circuit and supply fully galvanically isolated from supply voltage and all in- | output circuits. 传感器供电 12 VDC, max. 160 mA ( = 75 O) 4- or 6-wire-circuit 输入范围 0 … 36 mV, internal Res.: 7.5 nV (appr. 4.8 Mio div.) usable stepwidth: 200 nV Linearity < 0.002 % (typ.) Dead load suppression 0 … 100 % 取样间隔 10, 20, 40, 80,160 ms user selectable 精度 6000 e, Class III 0.5 μV/e @ 6 samples/sec LED状态显示 Status LEDs to signal operation and error conditions. 输入输出 All I | O circuits fully galvanically isolated from sensor input and supply. Profibus-DP (PR 5210/00 + /11) 12 Mbit, DP-V0 IEC 61158 Type 3 and IEC 61784 模拟量输出 (PR 5210/00 + /10) 0 | 4 … 20 mA, internal resolution 16 bit, usable stepwidth: 0.5 μA max. load 500 O user configurable | 数字 I | Os Function user configurable 3 + IN, 30 V, 10 mA 3 + OUT, 30 V, 30 mA 串行接口 RS232C via RJ-12 for configuration only RS422 | 485 via screw terminals Protocol: Remote Display Environmental conditions Operation: -10 … +55 °C Storage: -20 … +70 °C Humidity: 90 % RH, non-condensing Vibration acc. to DIN EN 680068-2-6 /Fc 供电 24 VDC, +10/-15 %, 8.2 W max. 合格证 EN 61000-6-2 and 61000-6-4 NAMUR, CE 防护等级 Housing | terminals IP20 Mounting on 35 mm DIN rail according DIN 46277 电子连接 Removable screw terminals for max. 2.5 mm2 System Phoenix | COMBICON 尺寸 99 + 116 + 45.2 mm 重量 Net 0.29 kg |
订货型号
PR 5210/00 Profibus-DP, Analogue Output, Digital I | O, Serial Interface 9405 152 10001
PR 5210/10 Analogue Output, Digital I | O, Serial Interface 9405 152 10101
PR 5210/11 Profibus-DP, Digital I | O, Serial Interface 9405 152 10111
