|
联系方式 ： 13352927502
传感器信号放大器是将传感器输出信号进行精密放大，线路内部进行稳压、恒流供桥、电压电流转换，阻抗适配，线性补偿，温度补偿等，将力学量转换成标准电流、电压信号输出。
美国Transducer Techniques TIO-3000集成放大器和信号调理仪功能，用于信号源和读出设备之间的信号调理器件，如衰减器、前置放大器、电荷放大器以及对传感器或放大器进行非线性补偿的电平转换器件。
The TIO-3000 System was originally designed to perform precision summing on 2, 3 , or 4 load cell signals for weighing applications. Development has progressed into accessory modules with considerable versatility for user defined configurations in a compact economical five (5) slot system with built-in meter and channel selector.
Please see below for more information on the four available plug in modules and for available system configurations.
详情请联系我们
Meter: 3 1/2 or 4 1/2 digit
Sensor Input: 9 pin D connector
Data / Control Output: 25 pin D connector
Size (Inches): 12 wide x 7.5 high x 8 deep
Power: 115 VAC 60 Hz
Fuse: 250 mA
Weight / Force Analog Data
Pressure Current Loops
Strain Peak Capture
Deflection (.5 ms Response Time)
Control (Alarms)
Quick Look Display
Amplifier Type: Bipolar differential
Gain Adjustment: 75 to 1000
Input Impedance: 50 megaohm minimum
Output Voltage: 0 to +-10 volts, less with sum
CMR: 10 dB min., DC to 15 Hz
Noise and Ripple: Less than 10 mV
Nonlinearity: .05% of full scale
Compliance: .1% of full scale
Frequency Response: DC to 16 Hz
Bridge Resistance: 120 to 1000 ohm
Bal Range (350 ohm): 25% of output, minimum
Shunt Calibration: Single point, local
Sensor Wiring: 6 wire shielded
Excitation Type: Constant 8 VDC
up to 100 mA
Load Regulation: .1% max for
订货型号
TI0-3000 N/A 5 Chan. Industrial Chassis
TI0-3000-4.5 with 4.5 (19999) Digit Meter
TM0-3 Amp/Conditioner Module
TM0-3A Amp/Cond 4-20MA Module
PKD-3 Peak Hold Module
DSP-3 Dual Setpoint Alarm Module
SUM-3 Precision Sum Module 0-10V
SUM-3A Precision Sum Module 4-20mA
